MA5680T_RIOGRANDE(config)#display alarm active all detail

  ALARM 16851701 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-19 
00:22:53-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 29, Equipment ID: 
                GONUMINI3
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851700 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-19 
00:22:53-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 8, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851699 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-19 
00:21:35-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 14, ONT ID: 72, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16851698 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:20:43-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 9, ONT ID: 23
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851695 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:18:17-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 52
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851694 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:18:17-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 21
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851677 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:12:43-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 13, ONT ID: 71
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851675 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:11:40-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 1, ONT ID: 16
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851674 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:11:40-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 2, ONT ID: 17
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851673 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:11:29-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 11
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851672 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:10:56-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 36
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851669 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:08:35-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 2, ONT ID: 50
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851659 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-19 
00:05:23-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 9, ONT ID: 36
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851657 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-19 
00:03:58-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 15, ONT ID: 36, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851656 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-19 
00:03:38-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 10, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851631 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:47:39-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 50
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851627 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:47:09-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 10, ONT ID: 112
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851622 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:43:27-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 14, ONT ID: 65, Equipment ID: 
                GPONV1.0
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851619 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:41:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 32, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851617 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:40:40-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 60
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851600 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:36:26-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 0, ONT ID: 18, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851596 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:34:36-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 27, Equipment ID: 
                ONT1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851590 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:32:15-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 5
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851587 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:31:56-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 7, ONT ID: 90
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851579 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:26:00-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 1, ONT ID: 31, Equipment ID: 
                FD604GW-DG
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851577 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:25:36-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 3, ONT ID: 108
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851566 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:23:27-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 60, Equipment ID: 
                GONUMINI3
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851559 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:19:29-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 6, ONT ID: 58, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851542 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:14:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 13, ONT ID: 60
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851532 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
23:10:41-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 36
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851518 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
23:05:25-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 11, ONT ID: 54, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851500 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:58:42-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 3, ONT ID: 114, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851469 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:49:48-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 10, ONT ID: 115, Equipment ID:
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851466 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:49:08-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 44, Equipment ID: 
                ONT1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851456 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:45:20-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 4, ONT ID: 35, Equipment ID: 
                XC220-G3v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851448 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:37:37-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 3, ONT ID: 9, Equipment ID: 
                TX-6610
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851438 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:33:00-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 34, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851433 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:30:32-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 9
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851430 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:29:59-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 12, ONT ID: 30
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851417 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:27:02-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 2, ONT ID: 37, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851412 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:24:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 3, ONT ID: 36, Equipment ID: 
                GONUMINI3
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851410 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:23:59-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 43
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851409 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:23:28-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 67
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851404 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:16:34-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 9, ONT ID: 78
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851398 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:15:34-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 40
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851379 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:12:15-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 7, ONT ID: 59, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851373 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
22:09:15-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 26
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851362 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:06:33-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 118, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851348 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
22:01:33-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 2, ONT ID: 62, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851337 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
21:53:46-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 34
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851324 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
21:45:22-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 9, ONT ID: 122
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851314 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:42:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 7, ONT ID: 95, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851301 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:32:00-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 5, ONT ID: 19, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851280 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:18:55-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 85, Equipment ID: 
                EG8010H
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851263 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:13:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 6, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851256 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:11:44-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 17, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851243 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
21:06:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 111, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851217 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:58:08-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 4, ONT ID: 43, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851212 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:55:07-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 6, ONT ID: 29, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851204 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:51:34-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 0, ONT ID: 51, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851181 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
20:43:08-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 12, ONT ID: 121
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851138 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
20:32:24-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 12
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16851133 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:30:48-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 13, ONT ID: 39, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851089 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:21:41-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 8, ONT ID: 39, Equipment ID: 
                ONT1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851072 FAULT WARNING 0x2e313062 EQUIPMENT 2026-03-18 20:17:06-03:00
  ALARM NAME  : Remote optical transceiver parameters exceed warning 
                threshold
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, OntID: 75, TypeID: Bias 
                electricity, Upper threshold: 30.00, Lower threshold: 7.00, 
                Current value: 6.00
  DESCRIPTION : Remote optical transceiver is abnormal, the ONT is abnormal 
                and lose message would be happened
  CAUSE       : (1) The warning threshold value set is not proper
                (2) The OLT's optical transceiver is faulty
  ADVICE      : (1) Check whether the warning threshold value is correct
                (2) Check whether the OLT's optical transceiver is normal
  --- END

  ALARM 16851050 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
20:11:58-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 3, ONT ID: 98, Equipment ID: 
                ONT1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16851036 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-18 
20:06:32-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 16
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16851029 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
20:05:33-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 7, ONT ID: 28
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850934 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
19:30:52-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 2, ONT ID: 19, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850914 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
19:23:52-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 14, ONT ID: 23
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850889 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
19:14:57-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 13, ONT ID: 19, Equipment ID: 
                M10G
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850881 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
19:09:53-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 79, Equipment ID: 
                GONUMINI3
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850797 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
18:53:35-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 22
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850717 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
18:34:28-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 82
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850704 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
18:32:06-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 1, ONT ID: 3, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850700 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
18:30:51-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 2, ONT ID: 89, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850685 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
18:24:19-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 1, ONT ID: 28, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850653 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
18:14:16-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 42
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850451 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
17:52:59-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 1, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16850366 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
17:43:32-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 5, ONT ID: 99
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850343 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
17:43:32-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 12, ONT ID: 36
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16850011 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
17:25:27-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 13, ONT ID: 119, Equipment ID:
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849926 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
17:06:15-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 58, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849888 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
16:56:57-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 24, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849874 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
16:52:36-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 22, Equipment ID: 
                M10G
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16849856 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
16:48:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 8, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849855 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
16:48:03-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 13, ONT ID: 67, Equipment ID: 
                F670LV9.0
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849832 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
16:43:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 75, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849821 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
16:40:19-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 106, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849641 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
15:51:22-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 74
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16849514 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
15:25:18-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 2, ONT ID: 40, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849491 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
15:20:55-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 20
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16849430 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
15:08:44-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 104, Equipment ID:
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849425 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
15:06:31-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 48, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849400 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
15:03:07-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 15, ONT ID: 83, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16849340 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:46:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 107
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16849093 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:19:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 94
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16848912 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
14:17:06-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 11, ONT ID: 92, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16848888 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:15:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 13, ONT ID: 26
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16848885 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-18 
14:15:31-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 4, ONT ID: 68
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16848791 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-18 
14:13:49-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 6, ONT ID: 22
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16848733 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:13:32-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 50
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16848728 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:13:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 53
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16848726 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
14:13:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 70
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16845401 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
13:52:00-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 13, ONT ID: 8, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16845199 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
12:29:31-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 6, ONT ID: 2, Equipment ID: 
                F670LV9.0
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16845111 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
11:55:50-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 3, ONT ID: 28, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16845048 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
11:44:30-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 11
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16844972 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
11:24:20-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 71, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16844891 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
11:02:30-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 3, ONT ID: 31
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16844759 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
10:33:56-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 1, ONT ID: 91, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16844690 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
10:14:30-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 34
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16844523 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
09:42:03-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 15, ONT ID: 125, Equipment ID:
                F670LV1.1.01
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16844390 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-18 
08:53:35-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 26, Equipment ID: 
                M10G
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16844219 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-18 
07:53:49-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 0, ONT ID: 22, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16843999 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
06:37:52-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 11, ONT ID: 71
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16843983 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
06:33:00-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 10
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16843793 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
05:07:25-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 17
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16843462 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-18 
01:20:29-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 6
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16843181 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
22:28:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 45, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16842567 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
20:13:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 3, ONT ID: 22, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16842404 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
19:48:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 124
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16842400 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
19:48:31-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 98
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16841762 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
19:07:28-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 14, ONT ID: 9
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16841605 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
18:39:51-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 9, ONT ID: 51, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16841419 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
18:11:45-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 5, ONT ID: 110, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16841271 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
17:47:28-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 13, ONT ID: 25, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16841228 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
17:38:28-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 96, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16841167 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
17:29:28-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 97
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16841095 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
17:16:40-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 1, ONT ID: 107, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16841000 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
17:06:03-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 1, ONT ID: 69, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16840794 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
16:33:13-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 9, ONT ID: 7, Equipment ID: 
                XC220-G3v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16840702 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
16:14:49-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 3, ONT ID: 61, Equipment ID: 
                EG8010H
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16840509 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
15:38:14-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 3, ONT ID: 99, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16839859 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
13:30:38-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 15, ONT ID: 28
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16839666 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
12:56:27-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 9, ONT ID: 51
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16839638 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
12:53:44-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 94, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16839527 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
12:28:22-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 5, ONT ID: 17, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16838411 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
09:05:37-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 2, ONT ID: 72, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16838283 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-17 
08:41:25-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 10, ONT ID: 12
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16837843 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-17 
07:21:25-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 81
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16837473 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-17 
05:56:38-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 8, ONT ID: 42, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16837470 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-17 
05:55:25-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 8, ONT ID: 42
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16837119 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
04:25:32-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 69
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16836947 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:43:57-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 6, ONT ID: 2
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16836381 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:17:25-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 119
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16836356 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:17:14-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 2, ONT ID: 78
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16833938 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:09:25-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 71
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16833937 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:09:25-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 12
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16833934 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-17 
03:09:25-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 14, ONT ID: 8
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16833560 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
02:59:38-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 4, ONT ID: 27, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16831616 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-17 
02:59:31-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 62, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16830333 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-16 
20:15:08-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 5, ONT ID: 49, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16829859 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-16 
17:34:40-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 63, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16829517 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-16 
15:58:10-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 5, ONT ID: 24, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16829513 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-16 
15:56:45-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 94, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16828516 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-16 
11:19:49-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 5, ONT ID: 81, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16828065 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-16 
09:52:26-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 12, ONT ID: 25, Equipment ID: 
                F680V6.0.03
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16825399 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-15 
18:43:31-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 9, ONT ID: 66, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16825297 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-15 
18:13:09-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 5, ONT ID: 43, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16824900 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-15 
15:55:34-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 38, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16824027 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-15 
11:34:01-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 91, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16822093 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-15 
01:27:43-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 35, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16818948 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-14 
13:14:21-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 5, ONT ID: 34, Equipment ID: 
                F612V9.2
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16817666 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-14 
10:44:16-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 2, ONT ID: 40, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16814073 FAULT WARNING 0x2e112002 SERVICE QUALITY 2026-03-14 
08:49:13-03:00
  ALARM NAME  : The loss of GEM channel delineation (LCDGi) occurs
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 62
  DESCRIPTION : Several consecutive GEM frames can not be delimited because 
                of HEC errors,the ONT goes offline
  CAUSE       : (1) The quality of the optical path is poor
                (2) The ONT is faulty
  ADVICE      : (1) Check the fiber connection, ensure that the optical fiber
                is connected correctly and securely
                (2) Clean the fiber connector
                (3) Replace the fiber if the optical fiber is aged, bent, or 
                damaged
                (4) Reset or replace the ONT
  --- END

  ALARM 16813759 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-14 
07:38:00-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 46, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16810336 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-13 
16:58:37-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 15, Equipment ID: 
                M10G
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16809535 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-13 
14:08:14-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 12, ONT ID: 34, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16809511 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-13 
14:02:05-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 13, ONT ID: 100, Equipment ID:
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16808343 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-13 
08:47:58-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 13, ONT ID: 37, Equipment ID: 
                M10G
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16803467 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-12 
16:15:23-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 7, ONT ID: 79, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16803267 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-12 
15:20:36-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 72, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16799916 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-11 
20:40:12-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 2, ONT ID: 84, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16798896 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-11 
15:42:19-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 12, ONT ID: 16, Equipment ID: 
                GPONV1.0
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16798802 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-11 
15:09:19-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 2, ONT ID: 11, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16797968 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-11 
10:39:14-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 13, ONT ID: 82, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16797545 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-11 
09:19:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 3, ONT ID: 97, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16795684 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-10 
19:02:16-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 71, Equipment ID: 
                XC220-G3v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16795668 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-10 
18:58:35-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 3, ONT ID: 40, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16795372 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-10 
17:01:12-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 2, ONT ID: 29, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16794247 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-10 
12:03:32-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 7, ONT ID: 62, Equipment ID: 
                546M
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16786755 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-09 
16:14:24-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 104, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16783774 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-09 
08:07:33-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 15, ONT ID: 57, Equipment ID: 
                M10G
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16780717 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-08 
15:14:35-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 11, ONT ID: 39, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16779667 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-08 
11:37:15-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 3, ONT ID: 48, Equipment ID: 
                HG8546M
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16779619 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-08 
11:27:43-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 7, ONT ID: 127, Equipment ID: 
                GPONV1.0
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16778626 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-08 
06:00:59-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 5, ONT ID: 13, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16771592 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-07 
15:14:14-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 26, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16771396 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-07 
14:09:15-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 6, ONT ID: 38, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16771152 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-07 
12:50:15-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 3, ONT ID: 39, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16771051 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-07 
12:20:02-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 28, Equipment ID: 
                F612V9.2
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16767957 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-06 
13:26:44-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 90, Equipment ID: 
                HG8546M
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16767255 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-06 
09:28:28-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 6, ONT ID: 30, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16765330 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-05 
17:07:11-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 93, Equipment ID: 
                F601
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16764610 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-05 
14:03:15-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 7, ONT ID: 33, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16764459 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-05 
13:27:38-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 106, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16764336 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-05 
12:44:51-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 11, ONT ID: 69, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16763667 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-05 
09:18:02-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 3, ONT ID: 66, Equipment ID: 
                ONT1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16762735 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 4, The number of affected 
                ONTs: 116, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762734 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 6, The number of affected 
                ONTs: 115, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762733 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 5, The number of affected 
                ONTs: 116, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762732 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 11, The number of affected 
                ONTs: 119, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762731 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 8, The number of affected 
                ONTs: 92, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762730 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
02:35:57-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 9, The number of affected 
                ONTs: 103, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762216 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:24:00-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 6, The number of affected 
                ONTs: 82, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762215 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:24:00-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 15, The number of affected 
                ONTs: 127, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762214 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:23:59-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 11, The number of affected 
                ONTs: 105, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762213 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:23:58-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 4, The number of affected 
                ONTs: 123, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762212 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:23:58-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 0, The number of affected 
                ONTs: 115, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16762211 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
01:23:58-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 1, The number of affected 
                ONTs: 72, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761876 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
00:10:52-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 0, The number of affected 
                ONTs: 91, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761875 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-05 
00:10:51-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 10, The number of affected 
                ONTs: 68, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761825 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 12, The number of affected 
                ONTs: 82, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761824 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 15, The number of affected 
                ONTs: 126, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761823 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 8, The number of affected 
                ONTs: 105, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761822 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 14, The number of affected 
                ONTs: 94, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761821 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 7, The number of affected 
                ONTs: 105, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761820 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 12, The number of affected 
                ONTs: 100, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16761818 FAULT MAJOR 0x2e11a001 SERVICE QUALITY 2026-03-04 
23:59:31-03:00
  ALARM NAME  : The feeder fiber is broken or OLT can not receive any 
                expected optical signals(LOS)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 11, The number of affected 
                ONTs: 59, The number of DGi ONTs: 0
  DESCRIPTION : The OLT cannot receive expected optical signals in four 
                consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The laser of the PON port is closed
                (4) No ONT has been on line at this port
  ADVICE      : (1) Check feeder fiber connection and distribute fiber 
                orderly
                (2) Clean the fiber connector and replace the fiber if 
                necessary
                (3) Turn on the laser on the PON port
                (4) Ensure that some ONTs have been connected to the PON port
  --- END

  ALARM 16760453 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-04 
18:22:23-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 5, ONT ID: 44, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16760054 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-04 
17:19:12-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 7, ONT ID: 26, Equipment ID: 
                EG8010H
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16758889 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-04 
13:16:46-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 2, ONT ID: 49, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16748424 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-03-02 
20:25:50-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 13, ONT ID: 58, Equipment ID: 
                F660V7.1
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16744889 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-03-02 
10:51:55-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 14, ONT ID: 1
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16744836 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-02 
10:41:43-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 3, ONT ID: 118, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16739606 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-01 
18:32:34-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 0, ONT ID: 49, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16737554 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-01 
11:28:23-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 2, ONT ID: 36, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16737496 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-03-01 
11:14:16-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 70, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16735744 FAULT WARNING 0x2e313062 EQUIPMENT 2026-03-01 05:02:43-03:00
  ALARM NAME  : Remote optical transceiver parameters exceed warning 
                threshold
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, OntID: 70, TypeID: 
                Rx-power, Upper threshold: -1.00, Lower threshold: -30.00, 
                Current value: -31.55
  DESCRIPTION : Remote optical transceiver is abnormal, the ONT is abnormal 
                and lose message would be happened
  CAUSE       : (1) The warning threshold value set is not proper
                (2) The OLT's optical transceiver is faulty
                (3) The ONU's optical transceiver is faulty
  ADVICE      : (1) Check whether the warning threshold value is correct
                (2) Check if the fiber connection, Ensure that the optical 
                attenuation is normal on the optical path
                (3) Check whether the OLT's optical transceiver is normal
                (4) Check whether the ONU's optical transceiver is normal
  --- END

  ALARM 16730017 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-28 
09:50:44-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 11, ONT ID: 54, Equipment ID: 
                F670LV9.0
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16726366 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-27 
19:55:59-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 1, PortID: 1, ONT ID: 123, Equipment ID: 
                F6201BV9.3.12
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16719853 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-27 
10:32:56-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 6, ONT ID: 16, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16710678 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-02-26 
21:49:24-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 8, ONT ID: 45, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16708932 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-26 
16:42:42-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 4, ONT ID: 16, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16686775 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-24 
14:02:34-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 3, ONT ID: 63, Equipment ID: 
                F660V7.1
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16679877 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-23 
14:29:31-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 11, ONT ID: 44, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16674971 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-22 
19:31:51-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 4, PortID: 14, ONT ID: 60, Equipment ID: 
                GONUMINI3
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16665741 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-21 
14:48:59-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 74, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16660982 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-20 
16:35:08-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 14, ONT ID: 19, Equipment ID: 
                FD511G-X
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16660907 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-02-20 
16:23:45-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 41, Equipment ID: 
                F612V9.2
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16660897 FAULT WARNING 0x2e21a102 PROCESS ERROR 2026-02-20 
16:19:39-03:00
  ALARM NAME  : The GPON ONT configuration recovery fails
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 10, ONT ID: 41
  DESCRIPTION : The GPON ONT configuration recovery fails and some services 
                are affected
  CAUSE       : (1) The current configuration is beyond the actual 
                capabilities of the ONT
                (2) The software of ONT is faulty
  ADVICE      : (1) Check the current configuration, and modify the 
                configuration to match the actual capabilities of the ONT
                (2) Reset the ONT manually or re-register the ONT
  --- END

  ALARM 16660533 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-20 
15:21:40-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 13, ONT ID: 97, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16649879 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-18 
19:49:05-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 15, ONT ID: 88, Equipment ID: 
                MONUMAXFIBER1000
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16648900 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-18 
15:50:39-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 3, PortID: 8, ONT ID: 24, Equipment ID: 
                F670LV1.1.01
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16648499 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-18 
14:34:42-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 0, ONT ID: 90, Equipment ID: 
                XX230v
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

  ALARM 16645829 FAULT WARNING 0x2e112007 SERVICE QUALITY 2026-02-18 
11:08:55-03:00
  ALARM NAME  : The distribute fiber is broken or the OLT cannot receive 
                expected optical signals from the ONT(LOSi/LOBi)
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 2, PortID: 5, ONT ID: 71, Equipment ID: 
                XX230v
  DESCRIPTION : The OLT cannot receive expected optical signals from the ONT 
                in four consecutive frames
  CAUSE       : (1) The fiber is broken
                (2) The quality of the optical path is poor
                (3) The ONT hardware fails
  ADVICE      : (1) Check tributary optical fiber connection and backbone 
                optical fiber orderly, clean the fiber connector and replace 
                the fiber if necessary
                (2) Ensure that the optical attenuation of the optical path is                  normal
                (3) Reset the ONT or replace the ONT
  --- END

  ALARM 16641099 FAULT MINOR 0x2e11a00b SERVICE QUALITY 2026-02-17 
17:07:31-03:00
  ALARM NAME  : The dying-gasp of GPON ONTi (DGi) is generated
  SRVEFF      : SA
  PARAMETERS  : FrameID: 0, SlotID: 5, PortID: 12, ONT ID: 24, Equipment ID: 
                M10G
  DESCRIPTION : The ONT is power off
  CAUSE       : The power supply of the ONT is abnormal
  ADVICE      : Check the power supply of the ONT and ensure that the power 
                supply works in the normal state
  --- END

MA5680T_RIOGRANDE(config)#