MA5800-X7(config)#display service-port port 0/5/1 ont 0 
{ <cr>|e2e<K>|gemport<K>|sort-by<K>||<K> }: 

  Command:
          display service-port port 0/5/1 ont 0 
  Switch-Oriented Flow List
  -----------------------------------------------------------------------------
   INDEX VLAN VLAN     PORT F/ S/ P VPI  VCI   FLOW  FLOW       RX   TX   STATE
         ID   ATTR     TYPE                    TYPE  PARA
  -----------------------------------------------------------------------------
    2342 1060 common   gpon 0/5 /1  0    20    vlan  20         10   10   up   
  -----------------------------------------------------------------------------
   Total : 1  (Up/Down :    1/0)
   Note : F--Frame, S--Slot, P--Port,
          VPI indicates CM index for DOCSIS,
          VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
          v/e--vlan/encap, pritag--priority-tagged,
          ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
          When FLOW TYPE is plist, the value of FLOW PARA is a byte in
          hexadecimal format and indicates a priority list. Eight bits
          of its binary value indicate priorities 0-7 from the least
          significant bit to the most significant bit. Value 1 indicates
          that the priority is used. For example, if FLOW PARA is 0x23 and
          its binary format is 0010 0011, priorities 0, 1 and 5 are used

MA5800-X7(config)#